Chaparral FS2620R - Manual (Page 94)

FS2620R Rack Model User’s Guide
I-2
default settings, restoring 3-23
desktop, installing the router on 2-2
devices
changing addresses of 3-25 , 3-27
changing FC LUNs of 3-25 , 3-27
displaying a list of 3-27 , 3-28
displaying FC-to-SCSI address map 3-28
mapping of addresses A-1
mapping of FC-to-SCSI addresses A-1
SCSI channel problems 4-5
DHCP
using to resolve addresses B-2
disabling
channels 3-12
disabling, the router’s alarm 3-21
Display Address Map screen 3-26 , 3-29
Display Devices screen 3-28
displaying 3-28
configuration information 3-32
devices 3-27 , 3-28
events 3-29
hardware information 3-32
E
Enabled/Disabled screen 3-14
enabling
channels 3-12
enabling, the router’s alarm 3-21
enter Password screen 3-4
Ethernet card
upgrading firmware 3-38
Ethernet default settings 3-7
Ethernet port
accessing Router Adminstrator 3-3
connecting to 2-7
Event Log Menu 3-30
Event Log screen 3-30
event log, displaying 3-29
events, displaying 3-29
Extended Copy 1-4
F
FC host channels
configuring 3-12
FC LUNs
changing for devices 3-25 , 3-27
changing mapping mode 3-24
displaying for router 3-36
FC port, connecting to 2-5
FC-to-SCSI address map 3-28
firmware
upgrading the Ethernet card 3-38
firmware, upgrading 3-37
FIXED setting 3-24
Flash Utility
restoring router configurations 4-2
Flash Utility screen 3-38
FS2620R
benefits 1-2
changing the date 3-19
changing the initiator ID 3-17
changing the Loop ID 3-12
changing the LUN 3-12
changing the scan delay 3-21
changing the SCSI ID 3-17
changing the time 3-19
configuring 3-1
connecting to the FC port 2-5
connecting to the RS-232 port 2-6
connecting to the SCSI channels 2-4
disabling channels 3-12
disabling the alarm 3-21
displaying configuration information 3-32
displaying devices connected to 3-27 , 3-28
displaying events 3-29
displaying hardware information 3-32
displaying its FC LUN 3-36
enabling channels 3-12
enabling the alarm 3-21
features 1-2
installing 2-1
installing in a rack 2-2
installing on a desktop or table 2-2
making the data connections 2-3
mapping of addresses A-1
rebooting 3-23
restoring default settings 3-23
selecting the topology 3-12
setting channel speed 3-13
specifications 1-5
unpacking 2-1