Canon C3200 - Manual (Page 154)

Frame Erase 4-7
Special Scanning F
eatures
4
4
Press [Original Frame Erase].
5
Press [-] or [+] to set the frame erase width.
NOTE
• To enter values in millimeters, press [mm].
• When entering values in millimeters, you can also use - (numeric keys), and
(Clear) to clear your entries.
• You can change the values by pressing [-] or [+], even if you have entered the
values using
- (numeric keys).
• If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
• The default setting is '1/8" (4 mm)'. The maximum width that you can set for the
Original Frame Erase mode is '1 15/16" (50 mm)'.
● If you want to set the same width for all four borders:
❑
Press [-] or [+] to set the frame erase width ➞ press [Next].