Canon C3200 - Manual (Page 222)

Sending Methods 5-33
Sending Documents
5
5
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display
➞ press (Start) once for each original. When
scanning is complete, press [Done].
Scanning starts.
The document is stored in memory, and sent to the specified destination at the
specified time.
NOTE
• To cancel a delayed send job, press [Send Settings]
➞ [Delayed Send] ➞ [Cancel].
• If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
• You can also cancel a delayed send job from the System Monitor screen. (See
"Using the System Monitor Screen," on p. 1-44.)