Canon C3200 - Manual (Page 549)

Report and List Samples 13-6
Appendix
13
■ ST. TIME
The date and time (in 24-hour notation) at which the documents started to transmit are
printed. An asterisk (*) indicates a job that has already been printed.
■ DESTINATION ADDRESS
The address of the recipient is printed.
• If the send job is sent to a file server (FTP, SMB, or IPX), the path name is printed on the
second line.
■ DESTINATION ID
The name of the recipient is printed.
■ JOB NO.
The four digit number, that is automatically assigned when the document is accepted for
sending or receiving, is printed. Numbers between 0001 and 4999 are for sending, while
numbers between 5001 and 9999 are for receiving.
■ MODE
The type and mode of transmission are printed.
Transmission type:
Send (TX), Receive (RX)
Mode of transmission: FTP, SMB, IPX, User Inbox (BOX), I-Fax (I-FAX), E-mail (MAIL)
NOTE
If the optional Super G3 FAX Board is installed, FAX, G3, and ECM can also be displayed
in the MODE column. (See Chapter 14, "Appendix," in the Facsimile Guide.)
■ PGS.
The number of pages that were sent or received successfully, is printed.
■ RESULT
<OK>, <NG>, or <- -> and the transmission time are printed.
If the documents have been successfully received by the recipient, "OK" is printed.
If a sending error occurs "NG" (No Good) is printed, and the error code is printed on the
second line.
If an e-mail or I-fax transmission to a file server or the specified destination has been
confirmed as successful, "- -" is printed (similar to the "return receipt" feature of sending
an e-mail message).