Canon C3200 - Manual (Page 90)

Specifying Destinations 2-27
Basic Sending Methods
2
2
Press the Protocol drop-down list
➞ select [NetWare (IPX)].
3
Press [Browse].
IMPORTANT
After turning the main power ON, you must wait for the time set in Startup Time
Settings to elapse before pressing [Browse]. Network transmission is not possible
until this startup time has elapsed. To access Startup Time Settings, press
(Additional Functions) ➞ [System Settings] ➞ [Network Settings] ➞ [▼]. (See
Chapter 3, "Using a TCP/IP Network," in the Network Guide.)