Canon C3200 User Manual
Page 158
Frame Erase
4-11
Special Scanning F
eatures
4
4
Press [Book Frame Erase].
5
Press [-] or [+] to set the frame erase widths.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
-
(numeric keys), and
(Clear) to clear your entries.
•
You can change the values by pressing [-] or [+], even if you have entered the
values using
-
(numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default settings are '3/8" (10 mm)' for [Center] and '1/8" (4 mm)' for [Top], [Left],
[Right], and [Bottom]. The maximum width that you can set for the Book Frame
Erase mode is '1 15/16" (50 mm)'.
● If you want to set the same width for all four borders:
❑
Press [Center] and [Sides]
➞ press [-] or [+] to set their respective frame erase
widths
➞ press [Next].