Canon C3200 - Manual (Page 488)

LDAP Server Settings 10-69
System Manager Settings
10
7
Enter the server's address
➞ press [OK].
You can enter up to 48 characters for the server's address.
You can also use - (numeric keys) to enter numbers, and (Clear) to
clear your entry.
IMPORTANT
If <Login Information> is set to 'Use (security auth.)' for the LDAP server, and
Reverse DNS Lookup (a function that looks up the host name from the IP address)
is not supported, enter a host name and not an IP address.
NOTE
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
8
Press [Location to Start Search].
If the server's LDAP version is 3, then you do not have to specify [Location to
Start Search]. (If the LDAP version is 3, the machine automatically retrieves
settings from the server, and sets the location to start searching.) If the server's
LDAP version is 2, you have to specify [Location to Start Search].