Canon C3200 - Manual (Page 540)

Questions & Answers 12-25
T
roub
leshooting
12
Questions & Answers
Q
Can the machine automatically resend documents when there are errors in
transmission?
A
Specify the Retry Times setting. To access the Retry Times setting, press (Additional
Functions) ➞ [Communications Settings] ➞ [TX Settings] under <Common Settings> ➞
[
▼] ➞ [Retry Times]. (See "Number of Retry Attempts," on p. 8-10.)
Q
What happens to documents that are sent to my machine while the power switch on the
control panel is turned OFF?
A
These documents are automatically stored and printed when all documents have been
received.
Q
What happens if I-fax documents arrive when the machine is being used for copying?
A
While you are making copies, the documents are automatically received and stored in
the machine's memory, and will be printed automatically when you finish copying.
You can change the order in which these documents print. (See Chapter 4, "Customizing
Settings," in the Reference Guide.)
Q
I frequently send documents using the same settings. Can the machine be set to
automatically restore those settings when the power is turned ON or after an operation
completes?
A
You can store the desired settings as a Favorites Button and recall them as needed.
Alternatively, you can set the desired settings as the Standard Send Settings so that
they are always specified when the machine is turned ON or after an operation
completes.
Q
What happens to received documents if a paper jam occurs while they are printing?
A
If documents are not printed correctly, they are held in memory. When the paper jam is
cleared, printing resumes from the page at which the paper jam occurred.