Canon C3200 - Manual (Page 210)

Sending Methods 5-21
Sending Documents
5
10
Press [Sender's Names (TTI)].
11
Select a sender's name
➞ press [OK].
The name registered under <00> is selected by default.
If the desired sender's name is not displayed, press [ ▼] or [▲] to scroll to the
desired sender's name.
You can also enter the number of the desired sender's name using -
(numeric keys).
IMPORTANT
If the TX Terminal ID setting is set to 'Off', the sender's name will not be printed on
the recipient's recording paper, even if you select one. To have the sender's name
printed on every I-fax you send, you must set the TX Terminal ID to 'On'. To access
the TX Terminal ID setting, press
(Additional Functions) ➞ [Communications
Settings]
➞ [TX Settings] under <Common Settings> ➞ [▼] ➞ [TX Terminal ID].