Canon C3200 - Manual (Page 48)

Flow of Sending Operations 1-31
Introduction to Sending Functions
1
NOTE
• For more information on the different file formats, see "File Formats," in the
Glossary on p. 13-12.
• If [PDF (Compct)] is selected as the File Format, set the JPEG Compression Ratio
in TX Settings in Communications Settings (from the Additional Functions screen)
to 'Normal' or 'Low Ratio'. If the Compression Ratio is set to 'High Ratio', the
images output may be of a low quality even if [Image Priority] is selected in Image
Level for PDF (Compct) in TX Settings in Communications Settings (from the
Additional Functions screen). (See "JPEG Compression Ratio for Color Send
Jobs," on p. 8-6.)
8
Press [Job Done Notice]
➞ select the destination to which to
send the notification message
➞ press [OK].
You can set the notification message if necessary.
If you select a destination that is protected by Access Number Management,
press [Access Number]
➞ enter the access number for the selected destination.
(See "Specifying Destinations," on p. 2-2.)