Timer recording, When using the remote control – Aiwa XR-MT1000 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TIMER RECORDING
Timer recording is applicable for TUNER and VIDEO/AUX (with
an external timer) sources only.
Press CLOCK/TIMER three times so that © REC appears
on the display, then press ENTER within 6 seconds. Carry
out the steps of “SETTING THE TIMER” from step 2 and insert
the tape to be recorded on into deck 2 after step 5.
When using the remote control
Press TIMER twice so that 0 REC appears on the display, then
press 11 SET within 6 seconds.
To check the specified time and source
Press CLOCK/TIMER three times (or press TIMER twice on the
remote control). The timer-on time, the selected source name
and the duration for the timer-activated period are displayed for
6 seconds.
•
flC
III
N
□
<
3
o
ui
o
X
a
<
fiC
o
»
TIMER on the remote control is also available instead of CLOCK/
TIMER.
•
nSET on the remote control is also available instead of ENTER.
»or ►► on the remote control is also available instead of MULTI
JOG.
ENGLISH
19