Aiwa XR-MT1000 - Manual (Page 4)

PREPARATIONS
I
The DOLBY PRO LOGIC system which is the biggest feature of
this stereo system provides you with multi channel sound in your
home.
Complete setting and connection of the main unit, supplied
speakers, your TV and video equipment according to the following
procedure.
' Do not place the stereo cassette deck on the CD player. The
top window of the CD player may be damaged.
’ Make sure that the stereo cassette deck is placed on the left
side of the stereo receiver.
It may generate some noises or may prevent the stereo system
from proper functioning if the stereo cassette deck is placed on
the right side of or on the stereo receiver, or if the stereo receiver
is placed on the stereo cassette deck.
Check your system and accessories
(D ©
Ф DX-NM1000 Compact disc player
® FX-NM1000 Stereo cassette deck
© GE-NMT1000 Graphic equalizer
® MX-NMT1000 Stereo receiver
® SX-NMT1000 Front speakers
SX-R275
Surround speakers SX-C605
Center speaker
Remote control AM antenna FM antenna
Operating Instructions, etc.
Setting up the units
Place the units horizontally as the illustration above.
When placing them vertically, refer to the illustration as follows.
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO
LOGIC system, it is important to position the speakers properly.
Refer to the following illustration to find out the best location in
your room.
лГ
R
© ©
© ©
® Front speakers
@ Center speaker
Position in the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
© Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter (3.2 feet) above ear height.
• No sound is heard from the center and surround speakers when
the DOLBY PRO LOGIC, the SURROUND system and the 5.1
CH (page 35) are set to off.
• The center speaker sounds when the DOLBY PRO LOGIC or
the 5.1 CH (page 35) is set to on.
4 ENGLISH