Aiwa XR-MT1000 - Manual (Page 38)

STEREO RECEIVER WIX-NMT1000
CD PLAYER DX-NM1000
FM tuner section
Tuning range
Usable sensitivity (IMF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Pov/er output
Total harmonic distortion
Inputs
Outputs
General
Power requirements
Power consumption
Dimensions of main unit
(W
X H X D)
Weight of main unit
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Front
65 W + 65 W (50 Hz - 20 kHz, THD
less than 1%, 6 ohms)
Rear (Surround)
20 W + 20 W (50 Hz - 20 kHz, THD
less than 1%, 8 ohms)
Center
20 W (50 Hz - 20 kHz, THD less
than 1 %, 8 ohms)
0.1 % (8 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 150 mV (adjustable)
MD: 150 mV (adjustable)
MIC 1, MIC 2: 1 mV (10 kohms)
5.1CH INPUT
FRONT (L,R): 400 mV
SURROUND (L,R): 400 mV
CENTER: 400 mV
SUB WOOFER: 400 mV
LINE OUT; 210 mV
SUB WOOFER: 800 mV
SPEAKERS: accept speakers of 6
ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
CENTER SPEAKER: accept
speakers of 8 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
120 VAC, 60 Hz
125 W
260 X 121.5 X 345 mm
{IOV
4
X 4% X 13% in.)
5.8 kg (12 lbs 14 oz.)
CASSETTE DECK FX-NWI1000
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
Dimensions of main unit
(W
X H X D)
Weight of main unit
4 tracks, 2 channels stereo
Type II (high/Cr02) tape:
50 Hz - 16000 Hz
Type I (normal) tape:
50 Hz - 15000 Hz
60 dB (Dolby B NR ON, Type II
tape peak level)
AC bias
Deck 1: Playback head x 1
Deck 2:Recording/playback head
x 1, erase head x 1
260 X 121.5 x 318 mm
(10V4
x 4% x 12% in.)
1.8 kg (3 lbs 15 oz.)
Laser Semiconductor laser (X = 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 85 dB (1 kHz, 0 dB)
Harmonic distortion 0.05 % (1 kHz, 0 dB)
Wow and flutter Unmeasurable
Dimensions of main unit 260 X 106x318 mm
(W X H X D) (10V4X4V4X 12%in.)
Weight of main unit 2.2 kg (4 lbs 14 oz.)
GRAPHIC EQUALIZER GE-NMT1000
Dimensions of main unit 260 X 100.5 X 322 mm
(W X H X D) (IOV 4
X 4 X 12% in.)
Weight of main unit 1.0 kg (2 lbs 3 oz.)
SPEAKER SYSTEM SX-NMT1000
Cabinet type
3 way (magnetic shielded type)
Speakers Woofer:
140 mm (5% in.) cone type x 2
Tweeter:
60 (2 % in.) mm cone type
Super tweeter:
20 mm ('%6 in.) ceramic type
Impedance 6 ohms
Output sound pressure level 88 dB/W/m
Dimensions (W x H x D) 222 X 444 X 250 mm
(8 % X 17 '/2
X 97s in.)
Weight 5.8 kg (12 lbs 14 oz.)
38
ENGLISH
Specifications and external appearance are subject to change without
notice.
ItUls SYSTEM
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE Sound, Inc.
DOLBY NR/DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY”, the double-D symbol □□ and “PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.