Aiwa XR-MT1000 - Manual (Page 28)

CASSETTE DECK
© ®
INSERTING TAPES
REJECT Deck1 Deck 2 REJECT
REV MODE
D® @ ®
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type I (normal), Type II (high/Cr02) or Type IV (metal)
tapes for playback.
Press ± EJECT to open the cassette holder.
Name page
© REJECT (for deck 1)
® Deck 1
@ Deck 2
® REJECT (for deck 2)
® DOLBY NR 29-33
® REV MODE (DECK 2) 28-30
© SYNC DUB NORM/HIGH 31
® #REC/RECMUTE 30-33
® 11 PAUSE 29,30
M^.M^IMS 29
◄ ►PLAY/DIR 29
■ STOP 29-33
The display information of the cassette decks is shown on
the display of the stereo receiver.
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, thè reverse mode changes.
/
T P 2 - h m ^
To play one side only, select H.
To play from front side to reverse side once only, select H).
To play both sides repeatedly, select CD.
• When tapes are loaded in both decks, ID on the display
indicates “Continuous Play”.
28
ENGLISH