AMT Datasouth M7 - Manual (Page 48)

Page of 73 48
C. Cont. Mode
Press the and buttons to scroll the cursor to the sensor type. Press the
button to enter the black-mark sensor calibration mode.
C-1 Automatic
When enter the [Automatic] option, you will see following message and printer
will calibrate the sensor sensitivity automatically. When calibration process is
completed, the LCD screen will return to the previous menu.
C-2 Manual
In case “Automatic” sensor calibration cannot apply to the media, please use
“Manual” function to calibrate the sensor manually.
When enter [Manual] option, you will see following message. Please complete
there steps
Cont. Mode
Remove Label
Intensity
Ref. Level xxx
1. Remove the continuous label. Press the
button to set the value into the
printer.
Cont. Mode
Scan Paper
Intensity
Ref. Level xxx
2. Then, put the continuous label under the
Media sensor. Press the
button to
set the value into the printer.
Calibration 3/4
Bline Mode
> Cont. Mode
Exit
Cont. Mode 1/3
> Automatic
Manual
Exit
Cont. Mode
Automatic
Cont. Mode 2/3
Automatic
> Manual
Exit