AMT Datasouth M7 - Manual (Page 71)

Page of 73 71
6. Maintenance
This session presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab ( Head cleaner pen )
Lint-free cloth
Vacuum / Blower brush
100% ethanol
2. The cleaning process is described as following
Printer Method Interval
1. Always turn off the printer before
cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab (Head cleaner
pen) and 100% ethanol to clean
the print head surface. Clean the print head when changing
a new label roll
Print
Head
Platen
Roller
1. Turn the power off.
2. Rotate the platen roller and wipe it
thoroughly with 100% ethanol and a
cotton swab, or lint-free cloth.
Clean the platen roller when
Changing a new label roll
Tear Bar
/Peel Bar Use the lint-free cloth with 100%
ethanol to wipe it. As needed
Sensor
Compressed air or vacuum Monthly
Exterior
Wipe it with water-dampened cloth As needed