AMT Datasouth M7 - Manual (Page 60)

Page of 73 60
3.5 Service
Service
Initialization Mileage Info. Exit
This feature is used to restore printer settings to defaults and display printer mileage
information.
3.5.1 Initialization
Service 1/3 Initialization Initializing ...
> Initialization
Mileage Info. SELECT YES
Exit MENU NO
The printer settings are restored to defaults as below once printer is initialized.
Note :
When printer initialization is done, please calibrate the gap or black mark
sensor before printing.
Parameter Default setting
Speed M7 PLUS 6 IPS (152 mm/sec)
M7 4 IPS (101.6 mm/sec)
M7 (600dpi) 3 IPS (76.2 mm/sec)
Density
8
Label width 4.00"(101.6mm)
Label height 4.00"(101.6mm)
Sensor type
Gap sensor
Gap setting
0.12"(3.0mm)
Print direction 0
Reference point
0,0(upper left corner)
Offset
0
Print mode Batch mode
Serial port settings 9600 bps, none parity, 8 data bits, 1 stop bit
Code page
850