AMT Datasouth M7 - Manual (Page 50)

Page of 73 50
3.1.3.1 Baud Rate
Serial Comm. 1/5
> Baud Rate
Parity
Data Bits
This option is used to set the RS-232 baud rate. The default setting is 9600 bps.
Press
and buttons to select the different baud rate and press
button to set the value into printer. When you enter this list, the baud rate
value in the right side of ">" icon is the current setting in the printer. Press
key to cancel the setting and return to the previous menu.
3.1.3.2 Parity
Serial Comm. 2/5
Baud Rate
> Parity
Data Bits
This option is used to set the RS-232 parity. The default setting is “None”. Press
and buttons to select the different parity and press button
to set the value into printer. When you enter this list, the parity in the right side of
">" is the printer current setting. Press
key to cancel the setting and
return to the previous menu.
3.1.3.3 Data Bits:
Serial Comm. 3/5
Baud Rate
Parity
> Data Bits
This option is used to set the RS-232 Data Bits. The default setting is “8” data bits.
Press
and buttons to select the different Data Bits and press
button to set the value into printer. When you enter this list, the Data Bits
in the right side of ">" icon is the printer current setting. Press key to
cancel the setting and return to the previous menu.
Baud Rate 4/9
> 9600 bps
19200 bps
38400 bps
Parity 1/4
> None
Odd
Even
Data Bits 2/3
7
> 8
Exit