AMT Datasouth M7 - Manual (Page 51)

Page of 73 51
3.1.3.4 Stop Bit (s) :
Serial Comm. 4/5
Parity
Data Bits
> Stop Bit(s)
This option is used to set the RS-232 Stop Bits. The default setting is “1” stop bit.
Press
and buttons to select the different Stop Bits and press
button to set the value into printer. When you enter this list, the option in
the right side of ">" icon is the printer current setting. Press key to cancel
the setting and return to the previous menu.
Stop Bit(s) 1/3
> 1
2
Exit