If a fiber optic cable is damaged, If machine catches on fire, Jt100 operator’s manual – Ditch Witch 410SX User Manual
Page 19
Advertising
Safety - 16
JT100 Operator’s Manual
Emergency Procedures
CMW®
If a Fiber Optic Cable is Damaged
Do not look into cut ends of fiber optic or unidentified cable. Vision damage can occur.
If Machine Catches on Fire
Perform emergency shutdown procedure and then take the following actions. The order and degree of
action will depend on the situation.
•
Immediately move battery disconnect switch (if equipped and accessible) to disconnect position.
•
If fire is small and fire extinguisher is available, attempt to extinguish fire.
•
If fire cannot be extinguished, leave area as quickly as possible and contact emergency personnel.
Advertising