50 hour, 410sx operator’s manual – Ditch Witch 410SX User Manual

Page 93

Advertising
background image

Service - 92

410sx Operator’s Manual

50 Hour

50 Hour

Change Engine Oil and Filter
(Initial Service)

Change engine oil and filter after first 50 hours,
and every 200 hours afterward.

To change:

1.

Drain crankcase (1) while oil is warm.

2.

Replace filter (2) each time oil is changed.

3.

Add GEO at fill neck (3) until oil level is at
highest line on dipstick.

Location

Task

Notes

TRACTOR

Change engine oil and filter

GEO, initial service
5.5 qt (5.2 L)

Check fan/alternator belt tension

20 ft•lb (20 N•m)

Check exhaust system

Check radiator hoses

Clean battery terminals

Check air filter dust ejection valve

Check fuel lines

NOTICE: To prevent engine fire, immediately wipe off any oil that drips on the exhaust tubes or thermal
blankets. Replace thermal blankets if oil gets between the blanket and the exhaust system. Do not
operate machine with oil between the blanket and the exhaust system

Advertising