Plow, 410sx operator’s manual – Ditch Witch 410SX User Manual

Page 90

Advertising
background image

410sx Operator’s Manual

Service - 89

10 Hour

Check Exhaust Clamp

Check clamp and lock screw on exhaust
extension every 10 hours to ensure that it is tight.
Replace if needed.

Check Engine Coolant Level

Check engine coolant level every 10 hours with
engine cool at plastic overflow tank. Maintain
coolant level above low level mark. If low, add
approved coolant. Clean debris from radiator
cooling fins using compressed air or pressurized
water.

Plow

Check Plow Gearbox Oil Level

Check plow vibrator oil level every 10 hours.
Check when oil is cold, with vibrator level and
skid shoes on ground. Remove plow blade and
sod cutter if necessary. Oil should be halfway up
sight glass (2). Add MPL as needed at fill (1).

NOTICE:

Use caution when removing radiator
pressure cap.

To prevent engine damage or premature
failure, use only approved coolant.

Do not mix coolant types.

See “Approved Coolant” on page 84.

IMPORTANT: Do not add oil to plow vibrator
when hot. Let plow vibrator cool before
removing fill plug.

t39om061w.eps

t39om063w.eps

1

2

t39om064w.eps

Advertising