410sx operator’s manual – Ditch Witch 410SX User Manual
Page 53
Advertising
Transport - 52
410sx Operator’s Manual
Tie Down
CMW
Unload
1.
Lower trailer or ramps.
2.
Remove chains from tiedowns.
3.
Start tractor. See page 44 for proper start-up procedures.
4.
Raise trencher boom, but keep it low.
5.
Fully raise or remove plow blade and ensure that plow swing lock is engaged.
6.
Disengage frame lock.
7.
Disengage parking brake.
8.
Slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
To help avoid injury:
•
Unload unit with engine in low idle and boom as low as possible.
•
Unload trailer on level ground.
•
Attach trailer to vehicle before loading or unloading.
•
If trailer tilts, ensure that tilt latch is secured in the correct position.
Advertising