Ditch Witch 410SX - Manual (Page 85)

Service - 84
410sx Operator’s Manual
Recommended Lubricants/Service Key
Approved Fuel
This engine is designed to run on unleaded gasoline and 10 percent volume ethanol (E10). use only high
quality fuel meeting ASTM D4814 or equivalent. Do not use gasoline blended with methyl alcohol.
Approved Coolant
This unit was filled with John Deere Cool-Gard coolant before shipment from factory. Add only John Deere
Coo-Gard (255-006) or any fully-formulated, ethylene glycol based, low-silicate, heavy-duty diesel engine
coolant meeting ASTM specificationD6210 (fully formulated) or D4985 (low silicate).
NOTICE: Do not use water or high-silicate automotive-type coolant. This will lead to engine damage or
premature engine failure.