EXFO MaxTester MAX-610 User Manual
Page 127
Multimeter Tests
MaxTester Copper Test
119
Station Ground
The Confirmation window is prompted before every Station
Ground test is started if you selected Yes for the Show hookup
diagram. You can select No to hide the diagram next time you run
the test.
However, you can check the connection
diagram at any time by pressing the Hookup
Diagram button. In this case, the test does not
start when you press the Ok button to close
the Confirmation window.
Test Status displays the current state of
measurement or an error message.
To select the Station Ground parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press
on a value to open a list box of options.
4. Press
to confirm the value.