Battery charging and replacing – EXFO MaxTester MAX-610 User Manual
Page 260
Maintenance
252
MAX-610
Recycling and Disposal (Applies to European Union Only)
3. Remove the new battery from its package. Keep the package for future
use. Plug in the electrical connector ensuring the pins are correctly
aligned. Place the new battery in the MaxTester.
4. Inspect the inside rib around the MaxTester battery compartment to
make sure it is free from any debris. Remove any debris using a dry
cloth. Replace the battery back panel. Replace the 4 screws with a
moderate torque so the foam seal is evenly compressed without
damaging the screws.
Battery Charging and Replacing
Charging the MaxTester battery can take up to 5 hours. This battery was
custom made for your unit; replacement batteries must be ordered from
EXFO.
Recycling and Disposal
(Applies to European Union Only)
For complete recycling/disposal information as per European Directive
WEEE 2002/96/EC, visit the EXFO Web
.