EXFO MaxTester MAX-610 - Manual (Page 243)

Copper Auto Tests
MaxTester Copper Test 235
User Auto Test
Multimeter 2 Result
The Multimeter 2 Result page displays the following
results:

Resistive Balance - R-Leg, T-Leg, Loop
resistance, and pass/fail status and values in
Ω
and %.

Isolation - pass/fail status, Resistance and a Soak
Counter(s) for each wire Pair. If your unit has the
HIVOLT (high voltage) software option
configured, it enables Isolation Resistance
testing up to 500 V. Default is inherited from
Multimeter Isolation test.

Capacitance/Opens and Length for each wire Pair.
Noise Result1
The Noise Result page displays the following results
and pass/fail status:

VF Noise measures voice frequency noise in the
line.

Power Influence measures the effects that 50 Hz
and 60 Hz powerline (AC Mains) interference has
on the circuit under test.

VF Impulse Noise - High, Mid, Low counts,
respective detection levels, and Elapsed Time.
Here the pass/fail status is for the Mid level only.

WB Impulse Noise - impulse Count, Detection Level, and Elapsed
Time.