EXFO MaxTester MAX-610 - Manual (Page 245)

Copper Auto Tests
MaxTester Copper Test 237
User Auto Test
Frequency Result
The Frequency Result page displays the following
results:

VF/AC Balance (Active) and pass/fail status.

WB Balance pass/fail status.

WB Attenuation pass/fail status, parameters and
values for:

Cable Length

Elapsed Time (M:SS)

Load Coil (Detection) - number of load coils.
TDR Result
The TDR Result page displays the TDR test result
cable parameters and the distance to the most
significant reflection or Largest Event, in text and
graphical format in Portrait/Landscape Mode.

Test Identification displays the test being
measured, for example TDR.

Range allows you to set the range from the given
list.

Gain displays whether the parameter was set to
Auto or manual.

Pulse Width is a non-editable value that is updated dependent on
whether the parameters are set to Auto or manual.

Cable Setup button allows you to view the Cable Parameters of the
TDR test.