EXFO MaxTester MAX-610 - Manual (Page 178)

Noise Tests
170 MAX-610
NEXT
Spectrum Result Details
The Spectrum Results Details read-only page
displays the pass/fail status and test results in
graphical format.

Test Group is the overall test group of the
selected saved results file, for example
Noise Tests.

Test Identification is the test type of the group, for
example NEXT.

Test Modes is the mode of test, for example
Spectrum.

Select Graph button opens a new selection of function keys which
allow you to maneuver the graph as follows:

Cursor - press the left/right arrow keys to decrease/increase the
values by moving the cursor. Press and hold the left/right arrow
keys to accelerate the cursor. Press
to recall the cursor and
place it in the middle of the current x-axis limits.

Zoom references the middle of the x/y axis and not the cursor
position. Press the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.

Pan - use left/right arrow keys to pan the x-axis and the up/down
arrow keys to pan the y-axis.

1:1 resets the x-axis and y-axis limits to full scale.

Return To Test removes these function keys and returns to the
Spectrum results page.