Wb attenuation threshold settings – EXFO MaxTester MAX-610 User Manual
Page 195
Advertising
Frequency Tests
MaxTester Copper Test
187
WB Attenuation
WB Attenuation Threshold Settings
The Threshold Settings page allows you to set the
WB Attenuation threshold values for the test.
Attenuation sets up the good attenuation
threshold parameters.
Type is the threshold limit: either Maximum or
Minimum.
Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press
to confirm the value.
Advertising