EXFO MaxTester MAX-610 - Manual (Page 60)

Setting Up Copper Tests
52 MAX-610
Dialer Function
Dialer Function
The Dialer function provides a dial-up path from the
MAX-610 to another tester (or quiet termination or
silent switchman) through a switched circuit network.
DTMF (dual-tone multi-frequency) transmission is
enabled via the phone keypad allowing you to place
POTS calls. The dialer can be accessed from the
Copper Main pane and is also integrated into
individual test screens to give you quick access to the
manual dialer function, speed dial and last dialed lists,
without exiting the current test application.
To access the Dialer function:
1. On the Home pane use the up/down arrow keys
to highlight Copper Test, then press .
2. From the Copper Main page select Dialer and press .
Dialer
The Dialer function allows you to use the unit as a
telephone (with the built-in speaker or external
headset) and the on-screen phone keypad as a dialer
when Enter Number is invoked, whether in the test
results screens or through the separate dedicated
Dialer application. The following functions can be
accessed from this page:

Dialing Status shows the current status of the
dialed number.

Group ID displays the group ID number of the
dialed number if it was selected from the Phone
Book.

Entry ID displays the Entry Name of the dialed number if it was
selected from the Phone Book.