LINK Systems System 1100 Tonnage Monitor User Manual
Page 111
ERROR CODES
___________________________________________________________________
Error No.
Message / Action
10-8
than 125% of the channel rating.
060
Channel 1 high setpoint < low setpoint.
061
Channel 2 high setpoint < low setpoint.
062
Channel 3 high setpoint < low setpoint.
063
Channel 4 high setpoint < low setpoint.
The Peak tonnage high setpoint of the channel
indicated by the error code is set to a value less
than the low setpoint.
1)
Adjust the high or low setpoint so that the high
setpoint is greater than the low setpoint.
064
Data window 1, channel 1 high setpoint too high.
065
Data window 1, channel 2 high setpoint too high.
066
Data window 1, channel 3 high setpoint too high.
067
Data window 1, channel 4 high setpoint too high.
The Data window 1 high setpoint of the channel
indicated by the error code is set to a value
greater than 125% of the channel rating.
1)
Check the MACH RATING setting in the Config menu
for correctness.
2)
Adjust the indicated setpoint to a setting less
than 125% of the channel rating.
068
Data window 1, channel 1 low setpoint too high.
069
Data window 1, channel 2 low setpoint too high.
070
Data window 1, channel 3 low setpoint too high.
071
Data window 1, channel 4 low setpoint too high.
The Data window 1 low setpoint of the channel
indicated by the error code is set to a value
greater than 125% of the channel rating.
1)
Check the MACH RATING setting in the Config menu
for correctness.