LINK Systems System 1100 Tonnage Monitor - Manual (Page 31)

OPERATION
___________________________________________________________________
2-20
2.8.1 CAL-CHECK
The CAL-CHECK option is used to view the System 1100 calibration
numbers. When the operator selects the CAL-CHECK option from the
Config menu the screen below will appear and the calibration
numbers for each channel will appear in the tonnage displays. If
the number in the tonnage display varies, take the mean value of
the numbers that appear as the calibration number.
Always stop the machine from stroking before selecting the CAL-
CHECK option. Calibration numbers are most accurately read when
the main machine drive system, including flywheels, is at a
standstill. Pressing the EXIT key will return the operator to the
Config menu.
2.8.2 MACH RATING
The machine rating number is a scale factor that is programmed into
the System 1100 during initial calibration. The machine rating
should never be changed after calibration unless a memory failure
causes the loss of the proper setting.
CONFIG
$
CAL-CHECK
$
MENU $ MACH RATING $ 9
MACH NUMBER
THRESHOLD
CAM ZERO
DATA WINDOW
AUTO SETUP
MACH SPEED
TOPSTOP TMR
DECIMAL PT.
ALARM CLR
MEMORY CLR
STATIC-CAL
** CAL-CHECK MODE **
PRESS EXIT TO END