LINK Systems System 1100 Tonnage Monitor - Manual (Page 18)

OPERATION
___________________________________________________________________
2-7
(section 2.8.6), the DISPLAY option will appear as the first
selection in the Main menu. The Tonnage Display menu, simply
called 'DISPLAY' in the Main menu, is used to select which tonnage
reading will appear on the tonnage displays. The Tonnage Display
menu is shown below.
The up and down arrow keys are used to select the desired tonnage
for display. When the desired tonnage is shown on the menu the
corresponding tonnage readings will be displayed on the tonnage
displays.
Exiting the Tonnage Display menu automatically switches the tonnage
displays back to the peak tonnage. The Tonnage Display menu can be
exited by pressing the EXIT key or the CLEAR key.
2.4 SETPOINTS
If the System 1100 has been configured for use with data windows
(section 2.8.6), the Setpoints menu will appear when the SETPOINTS
option is selected from the Main menu, if the System 1100 has not
been configured for use with data windows, the screen shown in
section 2.4.1 will appear.
The Setpoints menu (shown below) allows the user to select a group
of setpoints for viewing or editing and to turn on or off the use
of individual data windows.
TONNAGE $ PEAK $
DISPLAY $ TONNAGE $ 9
DATA
WINDOW 1
DATA
WINDOW 2
DATA
WINDOW 3
DATA
WINDOW 4