LINK Systems System 1100 Tonnage Monitor - Manual (Page 34)

OPERATION
___________________________________________________________________
2-23
The DATA WINDOW screen is shown below.
While the keyswitch is in the PROG position the ON or OFF indicator
will flash, indicating that it can be changed. To enable or
disable the use of the data windows, press the ON or OFF keys
respectively.
2.8.7 AUTO SETUP
The AUTO SETUP option in the Config menu allows the operator to set
the automatic setup tolerance. While the automatic setup tolerance
can be adjusted during auto setup process, this screen is useful
for initial machine configuration. The auto setup configuration
screen is shown below.
While the keyswitch is in the PROG position the automatic setup
tolerance will flash, indicating that it can be changed. The
tolerance can be adjusted up to 30% and down to 1% using the up and
down arrow keys respectively.
2.8.8 MACH SPEED
The MACH SPEED option in the Config menu allows the operator to
configure the operating speed for the machine on which the System
1100 is installed. For variable speed machines, the speed range
should be select for the maximum operating speed of the machine.
The machine speed screen is shown below.
While the keyswitch is in the PROG position the speed range will
DATA WINDOWS: OFF
(ON/OFF TO CHANGE)
AUTO SETUP TOL: 5%
(USE 89 TO CHANGE)
SPEED: 61-120 SPM
(USE 89 TO CHANGE)