Tape feeding problems – Pitney Bowes DM1000 User Manual
Page 156
Advertising
10 • Troubleshooting
10-12
SV60951 Rev. B
Gummed tape is not
wet.
(continued)
Brush not out far enough to reach
tape.
1. Move the tape lever to the up position.
2. Move the brush lever to the right to pull the
brush mechanism forward.
3. Remove the brush.
4. Pull out brush and readjust to longer length.
5. Reinstall brush and release holder to return
original position.
Valve in moistener bottle cap is
not working.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List
in the guide for more
information
Low E-Z Seal® Sealing Solution
message is not working.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List
in the guide for more
information
Tape Feeding Problems
Description
Possible Causes
Solution
Tape
Lever
Brush Lever
Advertising