Pitney Bowes DM1000 - Manual (Page 74)

5 • Mailing System Setup
5-8 SV60951 Rev. B
Scale/Rates:
WOW® Weight
Limit You can set the WOW® weight limit to prevent the system from printing
postage on pieces of mail that exceed a set weight.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select WOW Weight Limit.
3. Enter the weight in lbs., and/or press the right arrow key and enter the
weight in oz. The weight cannot be great than 1 lb. 0 oz (or 0 lb. 16 oz).
4. Press the Enter to set the weight limit.
Scales/Rates:
WOW® Start Key While in WOW® mode, placing mail on the scale and manually typing a
postage amount will change the postage mode. Select what should happen
when the Start key is pressed.
• Select Revert to WOW to process the piece of mail in WOW® mode.
• Select Use Current Mode to process the piece of mail in the current
postage mode.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select WOW Start Key.
3. Select the appropriate option.
4. Press Clear or press the left arrow key to exit.
Scale/Rates:
Autoscale You can set AutoScale to On or Off.
Select On to enable the AutoScale feature. When a mail piece is placed on
the scale it will automatically weigh and rate the mail piece.
Select Off to disable this feature. If you disable this feature and your sys-
tem has an attached scale, you need to select the Attached Scale mode
when running mail if you want your system to weigh the mail and calculate
postage. Refer to Selecting the Postage Mode and Running the Mail in
Chapter 4
of this guide.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select AutoScale to toggle between On and Off.
Scale/Rates:
Carrier/Class
Display Use this option to control how the carrier and class are displayed on the
Main screen.
1. Press the Menu key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Carrier/Class Disp.
• Select Class Only if you only want the class to display on the Main
screen.
• Select Concatenate Carrier and Class if you want the carrier and
class to display on the main screen. I
NOTE:
Select Return to Maximum If you want to reset to the default
settings for the WOW weight limit.
NOTE: I
f you select this option the carrier and class name will be
concatenated, or broken out onto multiple lines.