Pitney Bowes DM1000 - Manual (Page 94)

5 • Mailing System Setup
5-28 SV60951 Rev. B
Taking the
Meter Out of
Service Call your Pitney Bowes representative if you need to return the postage
meter (contained in the IntelliLink® Control Center) to Pitney Bowes. When
instructed, follow the procedure here.
1. Press the Menu key and select Set Up.
2. Select Take Meter Out of Service.
3. Select Transfer Funds from Meter. This transfers the funds from your
meter back to your account.
4. The system transfers the funds and displays the amount transferred. To
print this amount on an envelope, place an envelope on the feed deck
and press the Start key. To print on a tape, simply press the Tape key.
Adding an
Optional
Printer You can connect a Pitney Bowes USB printer to your mailing system. To
add this optional external printer, all you need to do is plug the USB con-
nector from the printer into one of the two USB connectors on the mailing
system. Your mailing system recognizes the printer as soon as you plug it
into the base.
The dual USB ports are located beneath the main cover as shown here.
14
15
USB Ports