Rocktron All Access - Manual (Page 17)

14
SETUP, Page 3 of 10 - Bank Style
The third page of the SETUP program, Bank Style, determines how the next
preset will be recalled when the All Access™ is banked up or down. If the Bank Style
parameter is set to "First", the first preset in the new bank will be recalled when the
unit is banked up or down. If set to "Curnt", the current preset switch from the
previous bank will be recalled. When set to "None", an additional preset switch
must be pressed after banking up or down to recall the desired preset.
FIRST - recalls the first preset in the bank;
CURNT - recalls the preset based on the last preset switch pressed;
NONE - recalls a preset when a preset switch is pressed
To select the Bank Style:
(Œ) With the 2ND L.E.D. still lit, press the "ð" switch to access the next page
of the SETUP program, Bank Style. (If the All Access™ is not already in
SETUP mode, press "2ND", then "SETUP", followed by "ð" two times.)
() To select a different Bank Style, press the "INC" or "DEC" switch directly
below the currently selected style to scroll through the available options.