Rocktron All Access - Manual (Page 27)

24
SETUP, Page 8 of 10 - Preset Reinitialization
The eighth page of the SETUP program, Preset Reinitialization, allows for
the restoration of an individual preset to its original factory settings. This procedure
will erase any modifications that the user has made to a specific preset and return
it to its original condition.
To reinitialize an individual preset:
(Œ) With the 2ND L.E.D. still lit, press the "ð" switch to access the eighth page
of the SETUP program. (If the All Access™ is not already in SETUP mode,
press "2ND", then "SETUP", followed by "ð" seven times.)
() To select the preset to be reinitialized, use the "INC" and "DEC" switches
directly below the preset currently displayed.
Pressing the STORE switch at this time will erase the current settings
for the displayed preset and return them to their original condition as
shipped from the factory. All erased data will be unrecoverable.
(Ž) Once the desired preset is selected, press the "STORE" switch to
reinitialize the selected preset.
!
!
WARNING!
The Preset Reinitialization
feature will erase all data for
the selected preset and return
it to its original condition as
shipped from the factory.
Once the STORE switch is
pressed, all erased data will be
unrecoverable!