Rocktron All Access - Manual (Page 65)

62
CUSTOM
CUSTOM allows the user to create a custom MIDI string of any five MIDI
commands for each preset. All five commands will be sent whenever the preset is
recalled.
CUSTOM, Page 1 of 2 - Command Selection
The first page of the CUSTOM program, Command Selection, allows for the
selection of MIDI commands and the order in which they are to be transmitted once
the preset has been recalled.
To access CUSTOM:
(Œ) To access CUSTOM, press the "2ND" button to activate the secondary
button functions.
() Press the "CUSTOM" button. The L.E.D. above the "CUSTOM" button will flash
and the All Access™ will display the first page of the CUSTOM program.
To create a MIDI command string:
(Ž) Use the "INC" and "DEC" switches directly below the preset number
currently displayed to select the desired preset.
() Use the "INC" and "DEC" switches directly below the command number
currently displayed to select the desired command number.
() Use the "INC" and "DEC" switches directly below the MIDI command
currently displayed to select the desired MIDI command (see CUSTOM,
page 2).
MIDI Message Abbreviations:
NOFF> (Note Off)
N ON> (Note On)
KPRS> (Key Pressure)
C CH> (Control Change)
P CH> (Program Change)
CPRS> (Channel Pressure)
PBEN> (Pitch Bend)
T CLK (Timing Clock)
START (Start)
CONTU (Continue)
STOP (Stop)
ACTSN (Active Sensing)
SYSRS (System Reset)
M T C > (MIDI Time Code)
SGPP> (Song Position Pointer)
SGSL> (Song Select)
T REQ (Tune Request)
NONE (None)
Note:
MIDI commands which are
followed by a ">" symbol
require additional information
on the next CUSTOM page
before the message will be
stored in this page (see
CUSTOM, Page 2).
G