Hush / chorus / delay / reverb configuration – Rocktron Intellipitch User Manual
Page 31
Advertising
28
HUSH / CHORUS / DELAY / REVERB Configuration
This configuration provides
HUSH
®
noise reduction at the input to quiet a noisy input signal (such as from a
high-gain guitar preamp) with 4 chorus/delay voices and reverb.
Note:
When the Delay Time for any voice is set to zero, that voice is taken out of the
regeneration loops. This will allow for higher regeneration levels (if needed). It
also allows for a more pure sounding decay of the echo when used with other
voices set at long delay times.
Advertising