Hush / pitch shift / delay / reverb configuration – Rocktron Intellipitch User Manual
Page 42
Advertising
39
HUSH / PITCH SHIFT / DELAY / REVERB Configuration
This configuration combines
HUSH
noise reduction with 2 voices of pitch shift/delay, along with a separate
third delay. This is followed by a ducking feature for the delayed signals and reverb.
Note:
When the Delay Time for any voice is set to zero, that voice is taken out of the
regeneration loops. This will allow for higher regeneration levels (if needed). It
also allows for a more pure sounding decay of the echo when used with other
voices set at long delay times.
Advertising