Rocktron Intellipitch - Manual (Page 56)

53
9. MIDI Operation
A. MIDI Controller Assignments
Controller mapping allows for specific Intellipitch adjustable parameters to be mapped (or assigned) to a MIDI
controller number for real-time control (via a pitch wheel, expression pedal, etc.) in live performance situations.
Any parameter may be assigned to any controller number, from controller 0 through controller 120, or OFF. In the
OFF position, the assigned parameter will not respond to any MIDI control change. Each preset allows for up to 8
controllers.
Turn the PARAMETER SELECT control to access the first parameter of the Controller Assign
function. This parameter allows for the selection of a controller number which the first parameter
(selected in Step 5) will respond to.
Step 1 To access the Controller Assign function, turn the FUNCTION SELECT control one step
clockwise past "Title Edit".
CONTROLLER ASSIG
Step 2
NUMB1 XXX
Use the PARAMETER ADJUST control to select the controller number to be assigned to the
first parameter (PARA1). You may choose any number from 0 to 120, or OFF so that the
parameter will not respond to MIDI controller changes. Match this number with the MIDI
transmitter controller number. Step 3
After selecting the desired controller number, press the STORE button to save the number.
"STORED" will flash briefly on the display. Step 4
NUMB1 7
STORED
3,6,9,12 4,7,10,13 1 2,5,8,11