Rocktron Intellipitch - Manual (Page 49)

46
B. Changing preset parameters
The parameter menu for each effect can be called up via the FUNCTION SELECT control. Turn
this control to the effect to be edited. Step 1
***** REVERB *****
Turn the PARAMETER SELECT control to select the specific parameter to be edited for the
selected effect. Step 2
REV DECAY 59
Use the PARAMETER ADJUST control to change the parameter value. The LED above the
STORE button will light, indicating that the preset has been altered from its original state.
REV DECAY 32
The COMPARE button may be used to compare the old parameter value to the new one. Step 4
REV DECAY 59
4 1 2 3
Step 3