Rocktron Intellipitch - Manual (Page 8)

5
1 R (MONO) INPUT jack
This standard 1/4" mono jack provides input to the right channel of the Intellipitch.
When using only one input (mono), this jack should be used.
2 L INPUT jack
This standard 1/4" mono jack provides input to the left channel of the Intellipitch. When
using only one input, this jack should not be used.
3 R OUTPUT jack
This standard 1/4" mono jack provides an output for the right channel of the
Intellipitch. When using the unit in a mono application, either output jack may be used.
4 L CHANNEL OUTPUT jack
This standard 1/4" mono jack provides output for the left channel of the Intellipitch.
When using the unit in a mono application, either output jack may be used.
Note: When using a mono input (Right INPUT jack) and a mono output
(either the Left or Right OUTPUT jack), the left and right effected
signals are summed at the single output.
5 PHANTOM POWER jack
This jack provides the ability to power the Rocktron MIDI Mate ™ foot controller from a
seven pin MIDI cable which connects from the MIDI Mate to the MIDI IN jack on the
rear panel of the Intellipitch, thus eliminating the need to find an AC outlet near where
the footpedal would be placed during a performance—or the need to run an extension
cord out to the MIDI Mate.
Instead of inserting the adaptor into the MIDI Mate POWER jack, plug it into the
PHANTOM POWER jack on the Intellipitch. This will power the MIDI Mate through
pins 6 and 7 of the MIDI cable connecting the two units. A 7-pin MIDI cable must be
used for this feature and is available through your Rocktron dealer.
6 MIDI IN jack
This 7-pin DIN connector receives MIDI information from the device which is
transmitting the MIDI commands for the Intellipitch to execute.
4. Rear Panel