D. midi dump/load – Rocktron Intellipitch User Manual
Page 62
59
D. MIDI Dump/Load
Any or all of the Intellipitch user presets may be dumped to a sequencer or another Intellipitch via system
exclusive messages. The information exchanged when performing a MIDI dump consists of the configuration type,
parameter values, title characters and controller assignment/limit information. When dumping a single Intellipitch
preset into another Intellipitch, the preset being dumped may be loaded into any user preset location on the
receiving Intellipitch.
Dumping a single Intellipitch user preset into another Intellipitch:
Step 2
Using a standard MIDI cable, connect the MIDI OUT of the transmitting Intellipitch to the MIDI
IN of the receiving Intellipitch. Do not connect the other MIDI ports together.
Step 1
Turn the FUNCTION SELECT knob on both units to "MIDI Dump/Load".
MIDI DUMP/LOAD
Turn the PARAMETER SELECT knob on the transmitting Intellipitch to "Preset Dump". (The
current preset number will also be displayed.)
Step 3
54 PRESET DUMP
Turn the PARAMETER SELECT control on the receiving Intellipitch to "Preset Load". (The
current preset number will also be displayed.)
Step 4
78 PRESET LOAD