Rocktron Intellipitch - Manual (Page 9)

6
7 MIDI OUT/THRU jack
This standard 5-pin DIN connector passes on the MIDI information that is received at
the MIDI IN jack to other MlDI-compatible devices via a MIDI cable. It also outputs
MIDI data when performing a memory dump.
Note: Inherently in MIDI there is a limit to the number of devices which can
be chained together (series connected). With more than three devices, a
slight distortion of the MIDI signal can occur (due to signal degradation)
which can cause an error in MIDI signal transmission. Should this
problem arise, a MIDI box can be used which connects directly to the
MIDI device which transmits MIDI information and has multiple
connectors for the multiple devices receiving MIDI. MIDI cables should
not exceed 50 feet (15 meters) in length.
8 POWER jack
This jack accepts power from the 9VAC/1500mA adaptor supplied with the unit. For
more information on the power supply see the Power Requirements section on page 2.