Rocktron Intellipitch - Manual (Page 50)

47
C. Storing modified parameter values
To store altered parameter values, press the STORE button while the effect title or parameter is
displayed to start the store procedure. The display will alternate between the preset number/title
that the changes will be stored to and: Step 1
Turn the PRESET control to select the desired preset number to store the new parameter values
into (if you wish to store the new parameter values into the current preset number, this step is not
necessary). The display will now alternate between the new preset number and: Step 2
Press the STORE button a second time to store the new values into the selected preset number.
The display will briefly flash "STORED" before displaying the new preset number and title. Step 3
STORED
STORE TO PRESET
2 1,3,4
STORE TO PRESET
After the altered parameter values have been stored into the selected preset number, the
Intellipitch will display "COPY TITLE TOO?". This message is only displayed when storing
into a new preset number, and allows you copy the title from the original preset into the new
preset also, if desired. To copy the title from the original preset, press the STORE button a third
time and the display will again flash "STORED". Step 4
STORED
If it is not desired to copy the title of the original preset, simply turn the PRESET control to any
other preset or turn the FUNCTION SELECT control to any function to exit. The altered
parameters will still be stored into the new preset number.
If a preset with modified parameters is exited prior to completing the store procedure, all edited
parameter values will be lost and the preset will revert back to its original status the next time it
is recalled. When saving a preset’s altered parameters, make sure the display flashes "STORED"
before exiting the preset to ensure that it was indeed stored.
Note 1
Note 2