Altera QDRII SRAM Controller MegaCore Function - Manual (Page 61)

Altera Corporation MegaCore Version 9.1 3–29
November 2009 QDRII SRAM Controller MegaCore Function User Guide
Functional Description
The testbench instantiates a QDRII SRAM model, a reference clock for the
PLL, and model for the system board memory trace delays.
Altera provides a Verilog HDL simulation model. The model is a
behavioral model to verify the design but does not simulate any delays.
Altera recommends that you replace the model with the specific model
from your memory vendor.
f
For more details on how to run the simulation script, refer to “Simulate
the Example Design” on page 2–11 .
Constraints
IP Toolbench generates a constraints script,
add_constraints_for_
<variation name>.tcl, which is a set of Quartus II
assignments that are required to successfully compile the example
design.
1 When the constraints script runs, it creates another script,
remove_constraints_for_
<variation name>.tcl, which you can
use to remove the constraints from your design.
The constraints script implements the following types of assignments:
■ cqn , cq, and q capture pins placement
■ Capacitance loading
■ cq pin set to non-global signal
■ I/O type for all interface pins
■ Cut timing assignments for false timing paths
Parameters The parameters can only be set in IP Toolbench (refer to “Step 1:
Parameterize” on page 2–5 ).